Linksys, A Division of Cisco Systems, Inc.

Product:                WAP54G v3 (European)

Classification:         Firmware Release History (European version)

Release Date:           January 26, 2006

Firmware version:       3.05.03

This firmware is backwards compatible with older versions of the hardware.
______________________________________________________________________________

Version 3.05.03
- Fixed the "restore" bug where the wireless settings (SSID, security settings) 
were not restored from the config file properly.

Version 3.02 (initial release for ver. 3 hardware)
- Adds SES support, compatible with older versions of hardware

Version 2.08 May 13, 2004 ETSI
- Fixed problems with firmware not reporting IP properly to the wizard 
- Fixed internal firmware date issue

NOTE:  This firmware and 2.07 firmware are not backwards compatible with older 
wizards. WPA does not work in Wireless Bridge/Repeater mode in this releas

Version 2.07 March 1, 2004 ETSI (ver.2 initial release)
- Updated User Interface format and layout
- Adds AP Client Mode
- Adds Wireless Repeater Mode for WAP54G and WRT54G (router requires fw 2.02.2 
  or above)
- Access points running 1.0x firmware have to upgrade to 1.09.1 before they
  can be upgraded (filename for 1.09 firmware: osupgrade_for_ver_1_wap54g.trx).

Note:WPA does not work in Wireless Bridge/Repeater mode in this release



Version 1.09
- The firmware file is called osupgrade_for_ver_1_wap54g.trx
- Updates the OS on the Access points running older firmware so they can be
  upgraded to the 2.07 firmware.  NOT A FULL FUNCTIONAL FIRMWARE, REQUIRED FOR
  FUTURE UPGRADES.  SIMULTANEOUSLY RELEASED WITH 2.07 firmware

Note:  If you try and upgrade an older unit to firmware 2.07 without upgrading 
the firmware to 1.09.1 prior to upgrade, you may damage the Access Point.



Version 1.08
- Complies with final 802.11g standard
- Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption 
- Adds UI control to enable/disable frame bursting
- Adds UI control for antenna selection
- Added "B-Only" option to wireless modes
- Added "Default" option to Basic Rate settings

Note:WPA does not work in Wireless Bridge mode in this release

Version 1.06, February 18, 2003
- Improves Stability and Performance
- Improves Performance in mixed environment
- Improves compatibility with Legacy Client Adapter
- Fix Event Log (Records client MAC Address)
- Fix Bridging with WAP11 on some channels

Note: Please make sure to reset/reboot the unit after firmware upgrade is complete.

Version 1.05
- Initial Release