Linksys, A division of Cisco Systems, Inc.


Product:           WAG200G Annex A

Classification:    Firmware Release History

Release Date:      June 13, 2008

Firmware Version:  1.01.09

Language:	   Multi-language

Note: Not to be used with Annex B models (DE and E1)
____________________________________________________________

Firmware version: 1.01.09
Release Date: June 13, 2008
Change List:

* Fixed GUI access problem after DSL link is up when WAN is set to PPPoA, and ATM QoS is VBR
* Fixed PPP failed to connect when WAG200G receives 8 PADOs from network side, and check PPP connection comes up
* Fixed setup wizard to configure DUT cause DUT can't get DNS in Status.htm
* Fixed GUI Setup_DDNS.htm with incorrect entries
* Fixed ARP reply packet include PPPoE information
* Updated DSL datapump to 7.04.03
* Fixed PVC auto detect
* Fixed multicasting not working at LAN side after a few minutes
* Fixed GUI Status>DSL Connection page that always show Multimode in DSL Modulation Mode
* Added support and configuration for ADSL2-Annex-L for all language GUI
* Added Annex M support
* Fixed VPN pass-through IPSec response packet force port 500
* Fixed when NAT & Firewall are disabled, can’t access from WAN side to LAN PC issue
* Fixed Heavy UDP traffic causes WAN to disconnect issue



Firmware version: 1.01.06
Release Date: Oct 10, 2007
Change List:

* Fixed XSS and CSRF security issue
* Fixed UPnP hang problem
* Closed port 5190, 5566, and 4443 which are open for old AIM/MSN protocol
* Fixed DSL performance issue when P2P software is running for long time
* Added new Cisco and Linksys logo 
* Increased single port forwarding entries to 20
* Fixed PPTP server behind WAG200G not working issue
* Fixed the ‘Management’ page allows saving without a username or password entered issue
* Updated help page for the ‘Syslog’ option
* Added 3 more port mapping for Wizard TRUE function   
* Fixed WAN doesn't work after unplug/plug back DSL cable

Firmware version: 1.01.05
Release Date: May 23, 2007
Change List:

* Limited wireless channels to 1 through 11 for Brazil 
* Changed default settings for Brazilian Portuguese to GMT-3:00, PPPoE, LLC, 0, 35, Keep Alive
* Added Windows time zones
* Added time zones and settings for other languages
* Added language option in “Setup” page
* Fixed Portuguese (Brazil) UI display issue
* Added Brazilian Portuguese language support
* Added help for Reboot page
* Fixed Wizard security issue
* Fixed 120dpi issue in UI
* Avoid rebooting when user change settings in 'Basic Setup' and ‘Management’ page
* Removed Enable/Disable Wizard function from UI
* Changed “Logviewer” to “Syslog” in Web UI and Help Pages