• WET54GS5 Release Notes

    • Version 4.92 09/24/2005 Because of the security issue this version blocked the telnet function.
    Version 4.91 02/24/2005 Fixed WPA TKIP Pre-share special ASCII key character,then couldn't correct setting.
    Fixed WEP 64 special passphrase key,could be the device reset to factory default setting.
    Fixed reset to factory's default seting,then web server couldn't be correct working.
    Version 4.90 12/09/2004 Add support ETSI mode channel support
    Fixed WPA TKIP Pre-share authentication,exchange share key connect fail issue
    Version 4.85 4/1/2004 Change the default regular domain to US
    Disable CPU port when booting to prevent CPU hanging caused by packets looping at boot time
    Version 4.84 3/29/2004 Remove telnet server ( debug support) for formal release
    Version 4.83 3/29/2004 Remove unneeded programs in f/w
    Fixed cannot connect to device problem if loop detected under STP enabled
    Fixed WEP pages error under adhoc mode
    Version 4.81 3/24/2004 Modify switch's access list to disable button while adding new entry
    Fixed default route not deleted when set router to 0.0.0.0 caused by buggy /bin/route, might need further debug on /bin/route

    Version 4.8 3/19/2004

    		 fixed setup wizard cannot detect our device after 30 minutes problem

    Version 4.7 3/15/2004

    		 updated help pages
    Hunglin fix 802.1x problem and fixed port1 backdoor
    fixed [force port vid] bug
    fixed SNMP trap daemon will crash when plug in all interfaces problem
    add more check to web page for valid range and value

    Version 4.6 3/5/2004

    updated help pages

    Version 4.5 3/4/2004

    now generate 4 different WEP 128bit keys

    Version 4.4 3/4/2004

    change default username to admin instead of NULL and check username
    fix Hunglin 802.1x mac clone problem
    add close button to security window

    Version 4.3 3/2/2004

    fixed the "access list cannot delete when there is only one entry left" problem
    add range check for STP
    change default QOS priority to high for non-wireless port

    Version 4.2 3/1/2004

    fix setup wizard cannot detect our box issue

    Version 4.1 2/25/2004

    change QOS default to disable storm filtering
    change access list to old way, I tried to enhance performance in previous version but did not work

    Version 4.0 2/24/2004

    fix SNMP and RMON web page problem
    add backdoor for 802.1x and access list on port 1
    change to gzip and remove boot delay added to work around HW problem, since it's already fixed

    Version 3.9 2/23/2004

    add swutil 32,33 for setting Wireless Profile
    GUI setting will trigger set_prismoid(DOT11_OID_PROFILES)
    add b-only mode back

    Version 3.8 2/22/2004

    remove boot delay but still use slower bzip2
    merge with Hunglin's new security GUI and WPA fix
    will not show buglist on GUI anymore

    Version 3.7 2/20/2004

    fixed a lot of GUI based on Chris's feedback
    fixed STP big packet problem using Onno's new MVC
    fixed the mac address entering by checking there are 6 ":" check stp path cost or priority if they are in valid range

    Version 3.6 2/17/2004

    fixed ATU age timer setting problem
    change to a smaller boot delay around 8 second
    power led will blink during upgrade
    fixed 8021xrun bring up problem
    kill 8021xrun, sysd and snmptraplog during upgrade

    Version 3.5

    change back to bzip2 kernel from gzip, the previous version did not fix it correctly
    add 10 second of delay before init net device to see if we can work around the hw problem

    Version 3.4

    update site survey and chkstatus wordings, mostly from WEP to security
    fix leds and move all led function to islmvc driver
    change back to bzip2 kernel from gzip, because gzip boot faster and cause problem update sysd and cybersupplicant in /etc/init.d/

    Version 3.3

    add system up time in setup page
    change accesslist hash to XOR instead of +
    add per entry access list counter
    check WEP key to be not all NULL before commit
    change the QOS default to limit Flooded packets to 8MBps for all ports

    Version 3.2

    check password to be 5-12 in length
    link /usr/etc to /usr/local/ssl for WPA/WEP

    Version 3.1

    fixed incorrect SNMP trap message destination and make the trap recognizable to MG-SOFT
    fixed WEP page problem
    add customized mapping for QOS diff-serv and 802.1p
    merge with Hunglin's WEP/WPA fix

    Version 3.0

    fix cannot adding snmp trap dest in IE bug
    better link trap message generation
    set the 802.1p QOS priority mapping to use the pri[2:1] bits and some QOS wording

    Version 2.9

    new snmpsenttrapd for sendning boot, link up/down trap
    wireless state LED
    Spanning Tree protocol changes, now 90% working except big packet(IP greater than 1496)
    mask out VLAN port based vector to disallow same port in/out
    SWITCH-PORT web page change

    Version 2.8

    merge in Hunglin's 802.1x change
    add more check for valid mac address
    fix the bug that deleted static ATU entry still show in dynamic address table
    remove the wireless_cpu port from the to_port list in port monitoring
    remove 3 semicolons in SW-PORT page

    Version 2.7

    fix static address table port vector display problem
    update to latest wet54gv2 GUI
    modify switch-RMON Counter GUI to display one port at a time, or the page will be messed up
    change static address table back to 256 entries
    fix vlan 802.1q membership tag one more time
    merge in sysd with Max's apdp.c change

    Version 2.6

    fix vlan member tag problem
    fix qos default port priority setting problem
    snmp trap generation is working now

    Version 2.5

    fix get next page in switch table
    fix port monitoring problem which enabled port monitoring for all ports incorrectly in v2.4

    Version 2.4

    update fixes from Max(aplock.c ebtnatwacher.c) but not Onno(br_input.c)
    add SNMP web page for snmp trap destination, how snmp trap is not working yet
    fix defects 1,4,5,8,9 filed by Tommy
    multiple items in table can be delete together
    disable 2 check boxes in VLAN port based setting so that port1 can always access the web page when port based vlan is enabled.

    Version 2.1

    change default IP back to 192.168.1.226

    Version 2.0

    Integrate WPA codes.
    Fix sysd to disable socket reset, or web upgrade will timeout.
    Add help pages for RMON, PORT and Access List
    change default IP to 192.168.2.226

    Version 1.6

    Fix port 5 packets problem, caused by port monitoring code
    Add some switch help page
    Full switch function except spanning tree
    First official release to QA/PM/HW